[rtsp @ 0x58d0a683b440] method SETUP failed: 500 Internal Server Error

[LeptOn30]

Hi I'm getting an error trying to connect with my cameras and hope you can help me. Error is:

"
[2024-05-29 19:58:58] [DEBUG ] [viseron.components.ffmpeg.stream.camera_2] - Getting stream information for rtsp://:@192.168.254.121:554/onvif1
[2024-05-29 19:58:58] [DEBUG ] [viseron.components.ffmpeg.stream.camera_2] - FFprobe command: ffprobe -hide_banner -loglevel error -print_format json -show_error -show_entries stream=codec_type,codec_name,width,height,avg_frame_rate rtsp://:@192.168.254.121:554/onvif1
[2024-05-29 19:58:58] [ERROR ] [viseron.components.ffmpeg.stream.camera_1] - [rtsp @ 0x60f28653c440] method SETUP failed: 500 Internal Server Error
[2024-05-29 19:58:58] [ERROR ] [viseron.components.ffmpeg.stream.camera_1] - rtsp://:@192.168.254.119:554/onvif1: Server returned 5XX Server Error reply
[2024-05-29 19:58:58] [ERROR ] [viseron.components] - Domain camera for component ffmpeg is not ready. Retrying in 20 seconds. Error: FFprobe could not connect to stream. Output: {'error': {'code': -1482175992, 'string': 'Server returned 5XX Server Error reply'}}
[2024-05-29 19:58:58] [DEBUG ] [viseron.components.webserver.api.handlers] - Routing to CamerasAPIHandler.get_failed_cameras(*args=[], kwargs={}, request_arguments={})
[2024-05-29 19:58:58] [ERROR ] [viseron.components.ffmpeg.stream.camera_2] - [rtsp @ 0x640f488be440] method SETUP failed: 500 Internal Server Error
[2024-05-29 19:58:58] [ERROR ] [viseron.components.ffmpeg.stream.camera_2] - rtsp://:**@192.168.254.121:554/onvif1: Server returned 5XX Server Error reply
[2024-05-29 19:58:58] [ERROR ] [viseron.components] - Domain camera for component ffmpeg is not ready. Retrying in 20 seconds. Error: FFprobe could not connect to stream. Output: {'error': {'code': -1482175992, 'string': 'Server returned 5XX Server Error reply'}}
"

Config file is:

"
ffmpeg:
camera:
camera_1: # This value has to be unique across all cameras
name: Varanda - Garagem
host: !secret camera_one_host
port: 554
path: /onvif1
rtsp_transport: udp
username: !secret camera_one_username
password: !secret camera_one_password

camera_2:  # This value has to be unique across all cameras
  name: Varanda - Cozinha
  host: !secret camera_two_host
  port: 554
  path: /onvif1
  rtsp_transport: udp
  username: !secret camera_two_username
  password: !secret camera_two_password

logger:
default_level: debug

Then add an object detector

darknet:
object_detector:
cameras:
camera_1: # Attach detector to the configured camera_1 above
fps: 1
scan_on_motion_only: false # Scan for objects even when there is no motion
labels:
- label: person
confidence: 0.75
trigger_recorder: true

  camera_2:  # Attach detector to the configured camera_2 above
    fps: 1
    labels:
      - label: person
        confidence: 0.75
        trigger_recorder: true

You can also use motion detection

mog2:
motion_detector:
cameras:
camera_1: # Attach detector to the configured camera_2 above
fps: 1
camera_2: # Attach detector to the configured camera_2 above
fps: 1

To tie everything together we need to configure one more component.

nvr:
camera_1: # Run NVR for camera_1
camera_2: # Run NVR for camera_2
"

I don´t have that problem using the command below:

ffmpeg -rtsp_transport udp -i rtsp://admin:@192.168.254.119:554/onvif1 streamfile.mkv

The command above connects and generates the file without any issue.

I would like to thank you in advance for your attention and support.

Cheers,

Guaracy

[roflcoopter]

Do you have any special characters in your password?

If so i made some changes in 3.0.0b7 which escapes these special characters

[LeptOn30]

Actually no I don't I used too but had some problems with ffmpeg and had to change. ;)