TL-WN722N-V2 Drivers clean ported to Kernel 4.4,4.8, 4.10, 4.13, 4.14, 4.15 & 4.18(GNU/LINUX)

TL-WN722N-V2

Requirements

Install appropriate "linux-headers" for your linux distribution before make !

For Example for ubuntu [Very Important]

	 $ sudo apt-get install linux-headers

Installation Instruction

AS DKMS MODULE

1. Install dependencies and Change directory to /usr/src

    $ sudo apt-get install git dkms git make build-essential
    $ cd /usr/src
   

2. Clone the repository

    $ sudo git clone https://github.com/abhijeet2096/TL-WN722N-V2
   

3. Add a Symbolic link for dkms to know where source is

    $ sudo dkms add ./TL-WN722N-V2
   

4. Build the source

    $ sudo dkms build -m 8188eu -v 1.2
   

5. Install the Build drivers

    $ sudo dkms install -m 8188eu -v 1.2
   

6. Modprobe it .

    $ sudo modprobe 8188eu
   

7. Reboot system .

    $ sudo reboot
   

NOT AS DKMS MODULE

1. Spawn terminal and clone the above repo by

    $ git clone https://github.com/abhijeet2096/TL-WN722N-V2
   

2. Change the working directory with

    $ cd TL-WN722N-V2
   

3. Clean using $ sudo make clean .
4. Compile using $ sudo make all .
5. Install above driver as

    $ sudo make install
   

6. Reboot your system !

P.S for uninstalling above driver $ sudo make uninstall

Activating Monitor Mode

1. Plugin the device .
2. Spwan terminal $ iwconfig and notice the device name.
3. $ sudo ifconfig <device-name> down
4. $ sudo iwconfig <device-name> mode Monitor
5. $ sudo ifconfig <device-name> up
6. $ iwconfig output mode should be now "Auto"
7. Go root $ sudo -i
8. airmon-ng start <device-name>
9. `airodump-ng ' 10 Monitor mode should start

Activating/Deactivating LED

1. Clone this Repository.
2. Edit include/autoconf.h in your favourite editor
3. go to line 173 and comment/uncomment #define CONFIG_LED
4. Make again the drivers
5. Reboot system

Results

Results are displayed below in table.

Drivers	Signal Strength
lwfinger/rtl8188eu	0-10 %
mfruba/kernel	65-75 %
abhijeet2096/TL-WN722N-V2	85-95 %

NOTE: All results are tested from same distance from wifi router !

Donate

Bugs

I was not able to inject packets. If you want to help please ping me on Email.

About

The Drivers are for TP-LINK TL-WN722N Version 2 . The drivers are ported to kernel 4.4, 4.8 ,4.10, 4.13,4.14 & 4.15 from source from TP-LINK-WEBSITE which was intially made for kernel 4.3 .

Contributors

Abhijeet sharma

1. Github: http://github.com/abhijeet2096
2. Email: [email protected]
3. Mobile: +91-8629015433

[Akhil Singhal]

1. Github: http://github.com/akhilsinghal1234
2. Email: [email protected]
3. Mobile: +91-8629015410

References/Source/Credits

1. https://github.com/mfruba/kernel
2. http://www.tp-link.com/us/download/TL-WN722N.html
3. https://github.com/mfruba/kernel/pull/21/files
4. diederikdehaas/rtl8812AU#75
5. https://www.raspberrypi.org/forums/viewtopic.php?p=342670
6. http://xmodulo.com/build-kernel-module-dkms-linux.html
7. https://github.com/abperiasamy/rtl8812AU_8821AU_linux/pull/242/commits/af2ee890d7abefb559a0a2aee4b4e0da686ab9a8
8. https://github.com/jpts/rtl8188eu/blob/master/patches/b.patch
9. https://github.com/NextThingCo/RTL8723DS/pull/2/files