Merge pull request #9894 from burtyb/interfacer-1

Add 8086 RP2040 Interfacer

ports/raspberrypi/boards/8086_rp2040_interfacer/board.c

@@ -0,0 +1,9 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "supervisor/board.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/raspberrypi/boards/8086_rp2040_interfacer/mpconfigboard.h

@@ -0,0 +1,21 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+#define MICROPY_HW_BOARD_NAME "8086 RP2040 Interfacer"
+#define MICROPY_HW_MCU_NAME "rp2040"
+
+#define MICROPY_HW_LED_STATUS (&pin_GPIO16)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO27)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO26)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO13)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO12)
+
+// #define CIRCUITPY_CONSOLE_UART_RX DEFAULT_UART_BUS_RX
+// #define CIRCUITPY_CONSOLE_UART_TX DEFAULT_UART_BUS_TX

ports/raspberrypi/boards/8086_rp2040_interfacer/mpconfigboard.mk

@@ -0,0 +1,9 @@
+USB_VID = 0x3171
+USB_PID = 0x010D
+USB_PRODUCT = "RP2040 Interfacer"
+USB_MANUFACTURER = "8086 Consultancy"
+
+CHIP_VARIANT = RP2040
+CHIP_FAMILY = rp2
+
+EXTERNAL_FLASH_DEVICES = "W25Q16JVxQ"

ports/raspberrypi/boards/8086_rp2040_interfacer/pico-sdk-configboard.h

@@ -0,0 +1,12 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Put board-specific pico-sdk definitions here. This file must exist.
+
+// Allow extra time for xosc to start.
+#define PICO_XOSC_STARTUP_DELAY_MULTIPLIER 64

ports/raspberrypi/boards/8086_rp2040_interfacer/pins.c

@@ -0,0 +1,48 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_GP26), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO27) },
+    { MP_ROM_QSTR(MP_QSTR_GP27), MP_ROM_PTR(&pin_GPIO27) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) },
+
+    { MP_ROM_QSTR(MP_QSTR_PULL_SDA), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_GP18), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_PULL_SCL), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_GP19), MP_ROM_PTR(&pin_GPIO19) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_GP16), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED_UART), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_GP14), MP_ROM_PTR(&pin_GPIO14) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED_STQW), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_GP17), MP_ROM_PTR(&pin_GPIO17) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_GP13), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_GP12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO23) },
+    { MP_ROM_QSTR(MP_QSTR_GP23), MP_ROM_PTR(&pin_GPIO23) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);